Product Details
- Wall End Display without a base deck
- Attaches to a Lozier Island of equal height
- Utilizes Upper and Lower Stabilizer to attach to adjoining island section
- Lower stabilizer available in CHR only
- Order rear Gap Filler when unit is wider than island
- Compatible with 06 and low base island
- Shown here with Hardboard Back Panels
How to Order
HARDBOARD BACK
Hardboard Back Panels come in several configurations and colors.
CENTER RAIL
The Lozier Center Rail is for use on Gondola’s utilizing Hardboard Back Panels. The Center Rail holds the Hardboard Back Panel in place and prevents bowing. Use 2 per section for heights of 78H-120H.
UPRITE
Uprites are an essential component, supporting your Backs, Rails, Shelves, Decks, Base Brackets and more. Each face of the Uprite serves a purpose in supporting your Gondola or End Solution
SPLICER RAIL
The Lozier Splicer Rail is used to separate two back panels in 78″ to 144″ high applications.
BOTTOM RAIL
The Lozier Bottom Rail holds the back in place on a Lozier Gondola or End Solution
NO BASE WALL END DISPLAY LOWER STABILIZER
The No Base Wall End Display Lower Stabilizer Connects No Base End Caps to Gondola Base Brackets
GAP FILLER
Order the Gap Filler to fill the open space between the Bottom Rail and floor on the rear side of your Wall run.
WALL END DISPLAY STABILIZER
Anchor a freestanding Wall End Display to an Island section with a Wall End Display Stabilizer.
UPRITE END TRIM
Uprite End Trim snaps onto first and last Uprite and/or Extension Uprite to finish the appearance of your Gondola.
Components (order Separately)
Quantity
Ordering Instructions
- All No Base Wall End Displays that are intended for use with Shelves or Peg Hooks, must include a floor display to direct traffic away from protrusions. Extension Uprites cannot be used on this Display.
- No Base Wall End Displays can be centered on Gondolas with many different combinations of unequal Base Deck depths. Contact your Lozier salesperson for allowable combinations.
- MAXIMUM LOAD RATING 12,000 IN LBS UNBALANCED LOADS
End Cap Width
Min Base Depth
Max. Base Depth
3′
13″/13″
19″/19″
4′
13″/13″
25″/25″
6′ (two 3′ sect.)
25″/25″
31″/31″
No Base Wall End Display Components
Order Components Separately
