S-Series Storage Shelving Back Panels

S-Series Storage Shelving Back Panels

Part Number: SSBP_

The S-Series Back Panel can be used to stabilize S-Series Shelving. Use on back of a S-Series Storage Shelving section to create a closed or “closet” section.

Installation

Download PDF

Product Details

1/8″ Hardboard, unfinished
108″ – 144″ Backs are two-pieces joined with a Splicer
Notched to accept Back-to-Back Connectors
Can use on back of each section to create a closed or “closet” section
Back Panels (or Crossbraces) are required on ends of each run and every fourth section in between for stabilization
See diagram below for minimum recommended placement of Back Panels per run
Components include Back Panel(s), Screws, Washers and Splicer (ordered separately)

Product Options and Numbers

Example Part #: SSBP 48 0 72

S-Series Back Panel: SSBP

Width: 36″, 48″

Height: 24″, 36″, 48″, 60″, 72″, 84″, 96″

Standard Finish: N/A

Minimum Bracing Requirements Diagram

Codes

N/A

No Finish

How to Order

Back Panel Components by Section Height

Section
Height

36″ W Section
Back Panel QTY.

48″ W Section
Back Panel QTY.

Washer
(SS1511 N/A) QTY

Screw
(SS2221 N/A) QTY

Splicer
(SS1151 XB1) QTY

36″

1 (SSBP36036)

1 (SSBP48036)

4

–

48″

1 (SSBP36048)

1 (SSBP48048)

4

–

60″

1 (SSBP36060)

1 (SSBP48060)

6

–

72″

1 (SSBP36072)

1 (SSBP48072)

8

–

84″

1 (SSBP36084)

1 (SSBP48084)

8

–

96″

1 (SSBP36096)

1 (SSBP48096)

8

–

108″

1 (SSBP36084) + 1 (SSEBP36024)

1 (SSBP48084) + 1 (SSEBP48024)

12

1

120″

1 (SSBP36084) + 1 (SSEBP36036)

1 (SSBP48084) + 1 (SSEBP48036)

12

1

144″

1 (SSBP36072) + 1 (SSEBP36072)

1 (SSBP48072) + 1 (SSEBP48072)

16

1

Back Panel Standard Finish: N/A (no finish)

Back Panel component requirements vary by Section Height. See chart below to determine part numbers and quantities needed for each section.

Back Panel Standard Finish: N/A (no finish)

Back Panel Components by Section Height