Gondola Wall (Wire Grid 1 Side, Marteck 1 Side)
The industry standard for store fixture shelving. Lozier Gondola Wall sections feature both standard and heavy duty options, and are adjustable with 1″ vertical shelf spacing. Many sizes and accessories are available to meet virtually any merchandising requirements you need.
Product Details
- 1″ vertical shelf adjustability
- Built-in leveling legs
- Base Brackets snap securely to Uprites via spring latch
- Electrical knockouts accommodate power & lighting
- Self-aligning Base Deck
- High Load Capacity
- Heavy Duty Uprites available for even more capacity
- Grid retainers and Retainer Backs are used to add any combination of single, double, or triple back sets to a Gondola Wall or Island section.
- The respective single, double, or triple back retainers are detailed in the
Wire Grid Back Retainer Chart. - RBE_ style grid or hardboard backs can be used interchangeably in any of the grid retainer styles/positions.
Load Rating Information
Standard Duty- Load Rating
- Low Base -15,000 inch lbs unbalanced
- 06 Base- 12,000 inch lbs unbalanced
Heavy Duty- Load Rating
- Low Base -18,000 inch lbs unbalanced
- 06 Base- 20,000 inch lbs unbalanced
Downloads
Wire Grid Back Retainer Chart
Section Backs Used With Grid Retainers
Dimensions
Wire Back Options
SG – Slotgrid
MG – Multi Grid
LG – Louver Grid
Wire Retainer Options
S – Single Back
D – Double Back
T – Triple Back
How to Order
TOP RAIL
The Lozier Top Rail is used as a top trim piece on a Lozier Gondolas and end Solutions
HARDBOARD BACK
Hardboard Back Panels come in several configurations and colors.
WIRE GRID RETAINERS
Wire Backs require Back Retainer to fit backs into Uprite.
UPRITE
Uprites are an essential component, supporting your Backs, Rails, Shelves, Decks, Base Brackets and more. Each face of the Uprite serves a purpose in supporting your Gondola or End Solution
SPLICER RAIL
The Lozier Splicer Rail is used to separate two back panels in 78″ to 144″ high applications.
UPRITE END TRIM
Uprite End Trim snaps onto first and last Uprite and/or Extension Uprite to finish the appearance of your Gondola.
WIRE GRID BOTTOM RAIL
The Wiregird Bottom Rail comes in standard and heavy duty options.
SPRING LOCKING BASE BRACKET
Our Base Bracket serves as the foot of your Wall or Island section, locking into the Uprite using an integral spring latch. Available in Standard or Heavy Duty.
BASE END TRIM
Finish off your Island or Wall Shelving run with our Base End Trim. The Trim attaches to the first and last Base Bracket of the run, hiding the Bracket from customers’ view.
CLOSED BASE FRONT
The Closed Base Front snaps in place at the foot of your Island, Wall section or End Solution to block dust and other objects from collecting under your fixture. The Closed Base Front fits flush with the floor regardless of leveling adjustments.
STANDARD DECK
Base Deck acts as the bottom shelf of your unit and covers the floor beneath the fixture.
WIRE GRID BACK
Wire Backs come in Slot Grid, Multi-Grid, and Louver Grid.
Components (order Separately)
Starter Quantity
Add-On Quantity
** Splicer Rail only used for 96″H. and taller sections.
Gondola Wall (Wire Grid 1 Side, Marteck 1 Side) Components
Order Components Separately
Related Products
Wall 1/4″ Backs